Interface’s 6-axis load cell measures forces simultaneously in three mutually perpendicular axes and three simultaneous torques about those same axes. 12 full bridges provide mV/V output on 12 independent channels.

Interface’s 6-axis load cell is ideally suited to many industrial and scientific applications, such as aerospace, robotics, automotive and medical research (orthopedics and biomechanical).

A 72-term coefficient matrix is included for calculating the load and torque values in each axis.

Interface’s BX8 Amplifiers including BlueDAQ software greatly simplify the data acquisition process.

Models 6A225 and 6A300 are available.

• 6-Axis – force and torque in all six axes
• Capacities: Force N(lbf)/Torque Nm(lbf-in)
  50kN(11.2K lbf)/10kNm(88.5K lbf-in)
  100kN(22.4K lbf)/15kNm(132.7K lbf-in)
  200kN(44.9K lbf)/20kNm(177K lbf-in)
  Nominal Force:
  Fx: 400kN(89.9K lbf)
  Fy: 400kN(89.9K lbf)
  Fz: 800kN(179.8K lbf)
  Nominal Torque:
  Mx: 40kNm(354K lbf-in)
  My: 40kNm(354K lbf-in)
  Mz: 40kNm(354K lbf-in)
• Compact size
• Force and moment values MUST be calculated using supplied 72-term coefficient matrix
• Low crosstalk – <1%
• Temperature compensated
• Optional BX8 amplifier and software can be used for force and moment value calculation